hvac trade supply All Products

C&D Valve part number CD9580SVK Deluxe Refrigeration Service Kit CD8404 (3): 1/4″ m. flare access fitting w/ 1/4″ copper tube extension C...

C&D Valve part number CD9560SVK Refrigeration Service Kit CD8404 (3), 1/4 m. flare access fitting w/ 1/4 copper tube extension CD8408 (3...

C&D Valve part number CD9530SVK HVAC Appliance Service Kit CD5050 (1), 1/4 flare thumb screw core depressor with o-ring CD3805 (1), Plast...

C&D part number CD9510SVK Appliance Access Valve Fitting Service Kit. CD5050 (1): 1/4″ flare thumb screw core depressor with two o-rings ...

Valve Core Removal Tools are designed to make work more efficient, but there’s nothing efficient about losing tools or equipment. The Hilmor Valve ...

Valve Core Removal Tools are designed to make work more efficient, but there’s nothing efficient about losing tools or equipment. The Hilmor Valve ...

Liquid low side charging adapter. For use with all CFC, HCFC and HFC refrigerants on 1/2 ton and larger units. 1/4” female SAE flare inlet, 1/4” ma...

1/4″ m. flare access body, solder end has 1/8″ ID and 3/16″, 1/4″ and 5/16″ OD steps, CD2250 brass wrench cap and valve core INCLUDES: 1 x...

The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into the low side of the system. The charging rate is up...

The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into the low side of the system. The charging rate is up...

Imperial 500RH, High Side Repair Kit for 513-C, 514-C & 515-C Series R-410A manifold. FEATURES: High Side Repair Kit for 513-C, 514-C & 5...

Imperial 500RL, High Side Repair Kit for 513-C, 514-C & 515-C Series R-410A manifold. FEATURES: Low Side Repair Kit for 513-C, 514-C & 51...

Rugged, steel forged wrench with four sizes covering almost any application. Ratchet has 1/4” square drive on one end; the other end has 3/16” an...

Core container with wrench, all brass with knurl for easy handling, the compact design holds three-valve cores. FEATURES: With 3 valve cores ...

Replacement rod and chuck for core removal tools. FEATURES: Replacement rod and chuck for core removal tools. INCLUDES: 1 x CD5577. SPE...

The Kwik-Tite ratchet wrench speeds installation of tube fittings and valves, hex nuts, bolts and fasteners. This unique wrench, with its open jaw ...

Imperial Tools 195F Kwik-Tite® Ratchet Wrenches suitable for 5/16” to 2-1/4” AF and 7 mm to 32 mm AF hex sizes. The Kwik-Tite ratchet wrench...

FEATURES: Plastic tube container with six valve cores and one core wrench tool. INCLUDES: POS display box includes 10 capsules each inclu...

FEATURES: CD3910 core removal tool (CRT) for use on 1/4″ flare access fitting, 1/4″ m. flare side port for attaching hose or gauge CD3975 th...

FEATURES: Thermometer w/ on-off switch Spare battery for use with CRT to measure superheat. INCLUDES: 1 x CD3975 Thermometer. SPECIFICATIO...

FEATURES: Kit with CD3915 CRT pick and CD3916 CRT thread chaser Made in the USA. INCLUDES: 1 x CD3915 CRT pick, 1 x CD3916 CR...

Torque release valve core tool. Take the guesswork out of tightening a valve core. Precision torque release ensures the valve core is tight...

The Imperial 127C Ratchet Wrench has 1/4”, 3/8”, 3/16” and 5/16” square drive ratchets and is specially designed for use on compressors with access...