hvac trade supply All Products

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three pouches so you can store you...

The Hilmor Zipper Pouch is your best bet for keeping track of all the small stuff on the job site – from small tools and accessories to receipts an...

The Hilmor Backpack Tool Bag is a comprehensive job site sidekick. It includes 19 exterior and interior pockets so you can store your tools safely ...

Imperial 15 pocket professional tool bag. Made from double-layered ballistic nylon with a wide mouth opening. Padded handles with 48″ shoulder stra...

Let’s keep one thing straight: a condenser should work as efficiently as you. FEATURES: Rugged and Durable – A plastic handle and wheels increase...

Let’s keep one thing straight: a condenser should work as efficiently as you. FEATURES: Rugged and Durable – A plastic handle and wheels increase...

Let’s keep one thing straight: a condenser should work as efficiently as you. FEATURES: Rugged and Durable – A plastic handle and wheels increase...

Let’s keep one thing straight: a condenser should work as efficiently as you. With two wheels that offer 12 sizes, the Hilmor® Fin Straightening To...

C&D Valve part number CD9580SVK Deluxe Refrigeration Service Kit CD8404 (3): 1/4″ m. flare access fitting w/ 1/4″ copper tube extension C...

C&D Valve part number CD9560SVK Refrigeration Service Kit CD8404 (3), 1/4 m. flare access fitting w/ 1/4 copper tube extension CD8408 (3...

C&D Valve part number CD9530SVK HVAC Appliance Service Kit CD5050 (1), 1/4 flare thumb screw core depressor with o-ring CD3805 (1), Plast...

C&D part number CD9510SVK Appliance Access Valve Fitting Service Kit. CD5050 (1): 1/4″ flare thumb screw core depressor with two o-rings ...

Valve Core Removal Tools are designed to make work more efficient, but there’s nothing efficient about losing tools or equipment. The Hilmor Valve ...

Valve Core Removal Tools are designed to make work more efficient, but there’s nothing efficient about losing tools or equipment. The Hilmor Valve ...

Liquid low side charging adapter. For use with all CFC, HCFC and HFC refrigerants on 1/2 ton and larger units. 1/4” female SAE flare inlet, 1/4” ma...

1/4″ m. flare access body, solder end has 1/8″ ID and 3/16″, 1/4″ and 5/16″ OD steps, CD2250 brass wrench cap and valve core INCLUDES: 1 x...

The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into the low side of the system. The charging rate is up...

The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into the low side of the system. The charging rate is up...

Imperial 500RH, High Side Repair Kit for 513-C, 514-C & 515-C Series R-410A manifold. FEATURES: High Side Repair Kit for 513-C, 514-C & 5...

Imperial 500RL, High Side Repair Kit for 513-C, 514-C & 515-C Series R-410A manifold. FEATURES: Low Side Repair Kit for 513-C, 514-C & 51...

Rugged, steel forged wrench with four sizes covering almost any application. Ratchet has 1/4” square drive on one end; the other end has 3/16” an...

Core container with wrench, all brass with knurl for easy handling, the compact design holds three-valve cores. FEATURES: With 3 valve cores ...

Replacement rod and chuck for core removal tools. FEATURES: Replacement rod and chuck for core removal tools. INCLUDES: 1 x CD5577. SPE...

The Kwik-Tite ratchet wrench speeds installation of tube fittings and valves, hex nuts, bolts and fasteners. This unique wrench, with its open jaw ...