0412 333 115
0412 333 115
You’re standing in a draughty warehouse in Ballarat. The lights are buzzing, the boss is frowning at the power bill, and you’re holding a clipboard thinking:
"How the heck do I figure out where all this energy is going?"
Whether you’re running an energy audit in Canberra, tackling a small office in Bendigo, or just trying to help a mate lower his bills, the right tools make all the difference.
And that’s where a Uni-T power clamp meter comes into play.
This friendly guide shows you how to make energy audits easier, faster, and more accurate — with a simple clamp meter you can trust.
Here’s what we’ll cover:
✅ Why power measurement & energy efficiency matter in Australia
✅ How a Uni-T power clamp meter works (in plain English)
✅ Aussie buyer’s guide for energy audits & power meters
✅ The best Uni-T products to try for your next audit
✅ A real customer story from Bendigo
✅ FAQs about power audits & clamp meters
Let’s dive in and make you look like an energy-saving genius — without the headache.
Energy costs in Australia keep climbing — and it’s not just about money.
🤑 Cut costs — Electricity bills in Canberra & regional Victoria have jumped over the past few years.
🌏 Help the planet — Energy efficiency reduces your carbon footprint.
📋 Stay compliant — Some buildings require energy audits for certifications or tenancy agreements.
🏠 Avoid overloads — Identifying power-hungry circuits prevents breakdowns and even fires.
In older buildings in Ballarat or historic parts of Bendigo, it’s not uncommon to find circuits that are overloaded or appliances bleeding energy.
Having a Uni-T clamp meter on hand lets you pinpoint the problem safely & quickly — and recommend solutions confidently.
You don’t need to be an engineer to understand it.
Here’s the simple truth:
A clamp meter lets you measure the current flowing through a wire — without having to disconnect anything.
Electricity flowing through a wire produces a magnetic field.
The clamp meter senses this field.
It calculates & displays the current (amps).
On power models, it also helps calculate power usage & energy (kWh).
So instead of sticking probes into live circuits, you just clamp around one conductor and get a safe, accurate reading.
✔️ AC & DC current measurement
✔️ Voltage & power factor measurement
✔️ Energy (kWh) calculation
✔️ Data hold & backlight for dark switchboards
✔️ CAT III safety rating or higher
If you want to see our full range of Uni-T clamps, check them here:
🔗 Uni-T Clamp Meters – HVAC TRADE SUPPLY
If you’re in the market for a clamp meter specifically for power measurement & audits, here are a few tips:
Not all clamps measure power & energy — some only do current.
Look for models that explicitly list:
✅ Power (Watts)
✅ Energy (kWh)
✅ Power Factor
These are critical when you’re trying to figure out energy efficiency.
If you’re auditing a home office in Bendigo? A meter with a range up to ~100A is fine.
Large commercial sites in Canberra? You might need a clamp rated for 600A or more.
For switchboards & distribution panels, you’ll want at least CAT III 300V–600V.
If you’re squeezing into roof spaces or tight cupboards in old Ballarat buildings, smaller jaws & a backlit screen make life much easier.
🔗 Uni-T UT210E — Compact, DC-capable, perfect for smaller audits.
🔗 Uni-T UT213C — Great all-rounder with True RMS accuracy.
🔗 [Uni-T UT216] — Heavier-duty, handles bigger circuits comfortably.
We tested a range of Uni-T clamps and recommend these for energy-conscious sparkies & HVAC techs:
✅ UT210E — Ideal for home & small commercial audits, with DC current & CAT III rating.
✅ UT213C — Adds True RMS for more accurate readings in real-world scenarios.
✅ UT216 — Handles higher currents in bigger facilities.
All are backed by local Aussie warranty & fast shipping.
Check the collection here:
🔗 Uni-T Clamp Meters – HVAC TRADE SUPPLY
We had a customer from Bendigo — let’s call him Johnny — who was hired to help a community centre lower their energy costs.
He showed up with an old-school multimeter & quickly realized it wasn’t cutting it.
We sent him a Uni-T UT213C overnight. He called back a week later to say:
“The clamp was brilliant — I found three circuits that were drawing way more than they should. They were wrapped around heaters left running all night. We saved them nearly $2k a year. Thanks legends!”
Johnny now takes her Uni-T on every audit.
Yes — but only models that include power (Watts) & energy (kWh) calculation, like the higher-end Uni-T units.
Yes — that’s the point. You don’t need to disconnect anything. Just make sure it’s CAT-rated for the job.
No — only clamp around one conductor (active or neutral). If you clamp both, the fields cancel & you get zero.
For fieldwork & audits, they’re accurate enough — within industry standards. Not lab-grade, but perfect for trade use.
Right here:
🔗 Uni-T Clamp Meters – HVAC TRADE SUPPLY
Whether you’re cutting costs in Canberra, chasing leaks in Ballarat, or improving efficiency in Bendigo — the right tool makes all the difference.
✅ Safe, CAT-rated testing
✅ Power & energy measurement
✅ Affordable & easy to use
✅ Trusted by Aussie tradies
Don’t guess. Measure.
Check out the full range here:
🔗 Shop Uni-T Clamp Meters – HVAC TRADE SUPPLY
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}