The Secop SC12CL is a 3/8 HP low back pressure (LBP) compressor for R404A and R507 refrigerant systems. It is designed for low-temperature refrigeration applications requiring stable cooling and dependable performance. This unit operates on 220–240V power supplies.
Part Identification
- Part Number: SC12CL
- Manufacturer: Secop
- Manufacturer Part Number (MPN): 104L2623
- Part Category: Hermetic Compressor
- No supersession data is listed for this part number.
Where This Part Is Used
- Low-temperature refrigeration systems
- Commercial freezers
- Refrigerated display units
Model coverage can change across production runs — confirm against your unit's data plate before ordering.
Specifications
| Horsepower (HP) | 3/8 HP |
|---|---|
| Voltage | 220–240V |
| Refrigerant Compatibility | R404A, R507 |
| Rated Capacity Range | 58W (–45°C) to 1292W (–5°C) |
Check Before You Order
- Verify the existing compressor's model number and specifications against the SC12CL to confirm compatibility.
- Confirm the unit's electrical supply matches the 220–240V requirement of this compressor.
- Ensure your system uses R404A or R507 refrigerant. Mixing refrigerants can cause system failure.
- Examine mounting points and connection types to ensure the SC12CL will fit physically and functionally within your existing setup.
Fitting Notes
- Installation and service of refrigerant circuits must be performed by a technician holding a current ARCtick licence.
- Ensure the system is fully discharged and recovered before removing the old compressor.
- Always replace the filter drier when replacing a compressor.
- Adhere to manufacturer specifications for torque settings on all connection points to prevent leaks.
- Evacuate the system to a deep vacuum and recharge with the correct type and amount of refrigerant and oil.
Ordering & Availability
This is a genuine Secop compressor. Sold individually unless a pack quantity is shown above. Current stock levels and estimated lead times are provided during checkout. Order from HVAC Trade Supply.
Commonly Ordered With
Technicians commonly order a suitable filter drier, expansion valve, and compressor oil when replacing a compressor.